Features
1. Input Voltage DC24V, single signal (DI) control. Break Point resume function.
2. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,unless two consecutive adjacent fault IC.
3. External GS8208 IC with breakpoint resume Control. SMD5050 RGB Color,Each Six leds is programmable.
4. 72leds/m,12Pixel/m,83.3mm/3.28" intervals cutting point
5. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System:SD controller , DMX controller , Artnet.
9. Only DI1 wired to controller‘ data . DI2(BI) is for the chip‘s breakpoint resume function when we resolder PCB
10. Special environment with severe signal interference, we advice wire first DI2(BI) to controller‘s GND.if not, we can let DI2(BI) as empty.



10. Special environment with severe signal interference, we advice wire first DI2(BI) to controller‘s GND.if not, we can let DI2(BI) as empty.
Product Model | ||||||||||
M/N | Size/mm | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
GE72RGB8208A24 GE72RGB8208B24 GE72RGB8208C24 GE72RGB8208D24 |
5000*10*3.0 5000*10*3.5 5000*12*4.0 5000*12*4.0 |
IP21 IP65 IP67 IP68 |
DC24V | SMD5050 RGB |
GS8208 External |
72 | 12 | R: 216lm G:432lm B :160m Mix W:720lm |
120 | 16.9w |


