1. Input Voltage DC5V, Single signal (data) control.
2. WS2812B/SK6812 IC embedded in SMD3535 RGB LED.
3. 48leds/m,20.8mm/0.82"intervals cutting point.
4. 5mm S shape PCB,each led is programmable.
5. White PCB/Black PCB available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System：SD controller , DMX controller , Artnet.
| Product Model | ||||||||||
| M/N | Size/mm | IP Rate | Voltage | Led type | IC type | Leds/m | Pixel/m | Luminous/m | Angle | Watt/m |
| GES48RGB2812BA | 1000*5*2.5 | IP21 | DC5V | SMD3535RGB low heat led | WS2812B Built-in |
48 | 48 | R:56lm G:120lm B:38lm Mix W:160lm |
120 | 6.0w |
| GES48RGB6812A | 1000*5*2.5 | IP21 | DC5V | SMD3535RGB low heat led | SK6812 Built-in |
48 | 48 | R:56lm G:120lm B:38lm Mix W:160lm |
120 | 6.0w |
ChatNow
Mail me